ABB IRB 8700 Series Product Manual page 742

4 Repair
4.8.4 Replacing the axis-3 gearbox
Continued
Attaching the axis-3 gearbox to frame, step 1
1
2
3
Continues on next page
742
Action
Apply Merkasol, 40 mm from the parallel arm side,
on the contact surface.
Apply Merkasol on the surface of the sealing ring.
Note
Make sure that the sealing ring is attached cor-
rectly on the gearbox.
Orient the gearbox to match the hole patterns
before lifting the gearbox onto the guide pins.
If the hole pattern does not match, carefully turn
the small gear in the gearbox very slowly, in order
to find the hole pattern.
xx1500002345
© Copyright 2015-2018 ABB. All rights reserved.
Note
Merkasol
xx1500002349
Area where to apply Merkasol, 40
mm wide from the parallel arm
side.
Merkasol
xx1500002350
xx1500002344
Product manual - IRB 8700
3HAC052853-001 Revision: F