ABB IRB 8700 Series Product Manual page 162

3 Maintenance
3.4.5 Changing oil, axis-4 secondary gearbox
Continued
4
5
6
7
8
Continues on next page
162
Action
Open the fill plug.
Open the inspection plug.
Refill the gearbox with oil.
Note
The amount of oil to be filled depends on
the amount previously being drained. Some
oil always remains in the gearbox after
draining.
Inspect the oil level.
Refit the oil plugs.
© Copyright 2015-2018 ABB. All rights reserved.
Note
xx1500002021
xx1500002022
Type of oil and total amount is detailed in
Technical reference manual - Lubrication
in gearboxes.
See Type and amount of oil in gearboxes
on page 140.
The level is measured at the fill hole.
xx1500002022
Required oil level is: 0 - 10 mm below the
oil plug hole.
See Inspecting the oil level in axis-4 sec-
ondary gearbox on page 113.
Tightening torque: 24 Nm
Product manual - IRB 8700
3HAC052853-001 Revision: F