3.3.8 Inspecting the balancing devices
General
Several points are to be checked on the balancing devices during the inspection.
This section describes how to perform the inspection regarding:
Inspection points, balancing devices
The balancing devices are located on either side of the lower arm, as shown in the
figure. The figure also shows the inspection points, further described in the
instructions.
xx1500002076
Required tools
Visual inspection, no tools are required.
Product manual - IRB 8700
3HAC052853-001 Revision: F
•
dissonance
•
damage
•
leakage
•
contamination/lack of free space.
© Copyright 2015-2018 ABB. All rights reserved.
3 Maintenance
3.3.8 Inspecting the balancing devices
Continues on next page
123