5 Calibration
5.4.3 Installation locations for the calibration tools
Continued
xx1500000787
Spare parts
When calibration is not being performed, a protective cover and an o-ring should
always be installed on the fixed calibration pin as well as a protective plug, included
a sealing, in the bushing. Replace damaged parts with new, if needed.
Spare part
Protection cover and plug set
810
Article number
3HAC056806-001
© Copyright 2015-2018 ABB. All rights reserved.
Note
Contains replacement calibration
pin covers and protective plugs
for the bushing.
Product manual - IRB 8700
3HAC052853-001 Revision: F