ABB IRB 8700 Series Product Manual page 247

9
10
11
Product manual - IRB 8700
3HAC052853-001 Revision: F
Action
Press the push buttons 1 to 6, one at a time, to make
sure that the buttons are moving freely and do not
stay in any locked position.
The revolution counters must be updated if the battery
has been disconnected.
DANGER
Make sure all safety requirements are met when
performing the first test run. These are further detailed
in the section First test run may cause injury or
damage on page 27.
© Copyright 2015-2018 ABB. All rights reserved.
4.4.4 Replacing the brake release unit
Note
See Updating revolution counters
on page 801.
4 Repair
Continued
247