4 Repair
4.7.5 Replacing the axis-6 motor
Continued
3
4
5
Continues on next page
624
Action
Use caution and push the carrier into posi-
tion.
Tip
Use a screwdriver (or similar) to press the
carrier into position.
Secure the carrier with the M4 screw.
Note
The M4 screw is located at the bottom of
the carrier.
Tip
The M4 screw may be difficult to fit. Make
sure the carrier is level and completely
pressed against the bottom.
Secure the cable bracket.
© Copyright 2015-2018 ABB. All rights reserved.
Note
xx1300001113
Attachment screw: M4x10
xx1300000485
Attachment screws: M6x12 (2 pcs)
xx1300000484
Product manual - IRB 8700
3HAC052853-001 Revision: F