ABB IRB 8700 Series Product Manual page 152

3 Maintenance
3.4.3 Changing oil in axis-2 and axis-3 gearbox
Continued
8
9
10
11
152
Action
Remove the oil dispenser and refit the
protection cap to the nipple of the oil filling
plug.
Refit the inspection plug.
Refit the ventilation plug.
DANGER
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section
run may cause injury or damage on
page 27.
© Copyright 2015-2018 ABB. All rights reserved.
Note
xx1500002014
Tightening torque: 24 Nm
xx1500001995
Tightening torque: 24 Nm
xx1500001994
First test
Product manual - IRB 8700
3HAC052853-001 Revision: F