Huawei SmartAX MA5603T Configuration Manual page 526

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Table 6-4 Key data plan
Confi
gurati
on
Item
MPLS
LDP
Routin
g
protoc
ol
Issue 01 (2014-04-30)
Data Remarks
l LSR ID: MPLS must be enabled at
10.10.10.10 three layers.
l VLAN: 4001 l MPLS must be enabled
l MPLS must be enabled
l MPLS must be enabled at
MPLS LDP is MPLS LDP must be enabled
enabled. at three layers.
l MPLS LDP must be
l MPLS LDP must be
The Open Shortest Ensure that the Layer 3
Path First (OSPF) interfaces on the MA5600T/
protocol is used. MA5603T/MA5608T and
those on PE1-PE4 can ping
each other.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
globally.
for VLAN.
VLAN interfaces.
enabled globally.
enabled at VLAN
interfaces.
6 Configuration Example of VPLS
Requirement on PE1-PE4
The LSR ID must be unique
on the entire network and
MPLS must be enabled.
MPLS LDP is enabled. The
remote LDP session to the
MA5600T/MA5603T/
MA5608T is configured on
PE1-PE4.
Layer 3 interfaces and routes
are configured on PE1-PE4.
Ensure that the Layer 3
interfaces and LSR IDs on
PE1-PE4 and those on the
MA5600T/MA5603T/
MA5608T can ping each
other.
501