Configuring The Tftp Transfer Mode - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
----End

1.6.2.4 Configuring the TFTP Transfer Mode

This topic describes how to configure the TFTP transfer mode for transferring (uploading or
downloading) files through the inband or outband Ethernet port of the MA5600T/MA5603T/
MA5608T. After the configuration, the TFTP server and the MA5600T/MA5603T/MA5608T
can communicate to transfer files in the TFTP mode.
Prerequisites
l
l
Tools, Meters, and Materials
l
l
Issue 01 (2014-04-30)
The Ethernet port of the TFTP server is directly connected to the inband or outband Ethernet
port of the MA5600T/MA5603T/MA5608T.
– Connect to the inband Ethernet port (Maintenance port) through the crossover cable.
– Connect to the outband Ethernet port (Upstream port) through the direct cable.
You have logged in to the MA5600T/MA5603T/MA5608T remotely from the console
(maintenance terminal), and have entered the global config mode.
Crossover cable
Direct cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
199