Huawei SmartAX MA5603T Configuration Manual page 359

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Data Plan
Table 3-8
Table 3-8 Data plan for configuring the P2P ISDN BRA service
Item
MG interface ID
ISDN BRA port
Procedure
Step 1 Configure the working mode of the ISDN BRA port.
In the BRA port mode, configure the working mode of the ISDN BRA port to P2P, configure
the activation mode to stable activation, and disable automatic activation.
huawei(config)#braport
huawei(config-braport)#braport attribute set 0/2/0 workmode p2p activemode stable-
active autodeactive disable
huawei(config-braport)#braport attribute set 0/3/0 workmode p2p activemode stable-
active autodeactive disable
huawei(config-braport)#quit
Step 2 Configure the ISDN BRA user data.
huawei(config)#esl user
huawei(config-esl-user)#sipbrauser add 0/2/0 0 telno 12345601
huawei(config-esl-user)#sipbrauser add 0/3/0 0 telno 12345602
huawei(config-esl-user)#quit
Step 3 Save the data.
huawei(config)#save
----End
Result
After the configuration is completed, two ISDN BRA users of ports 0/2/0 and 0/3/0 can call each
other successfully.
Configuration File
braport
braport attribute set 0/2/0 workmode p2p activemode stable-active autodeactive
Issue 01 (2014-04-30)
provides the data plan for configuring the P2P ISDN BRA service.
Subrack ID/
Slot ID/Port ID
Working mode
Phone number
Automatic
deactivation
Activation
mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
Data
0
0/2/0, 0/3/0
P2P
12345601, 12345602
Disabled
Stable activation
334