Huawei SmartAX MA5603T Configuration Manual page 997

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
l
Issue 01 (2014-04-30)
huawei(config-test)#
Caller port
Callee port
Test result
Verify the multicast service using multicast emulation.
1. Run the igmp static-join command to order a multicast program by emulating a
multicast user.
huawei(config)#btv
huawei(config-btv)#igmp static-join service-port 401 ip 224.1.1.10 vlan
1000
2. Run the display igmp use command to query the status of the multicast user.
huawei(config-btv)#display igmp user service-port 401
User
State
Authentication
Quick leave
IGMP flow ID
Video flow ID
Log switch
Bind profiles
IGMP version
Available programs
Global Leave
User MaxBandWidth
Used bandwidth(kbps)
The percentage of used
bandwidth to port rate(%)
Total video bandwidth
Mcast video bandwidth
Active program list
-------------------------------------------------------------------------
--
Program name
-------------------------------------------------------------------------
--
program1
-------------------------------------------------------------------------
--
Total: 1
3. Run the display multicast flow-statistic command to query the real-time traffic of
the multicast program.
huawei(config-btv)#display multicast flow-statistic ip 224.1.1.10 vlan
1000
Command is being executed, please wait...
Multicast flow statistic result: 360(kbps)
Verify the VoD service.
1. Run the display mac-address service-port command on the ONU to query learned
MAC addresses of VoD users. The learned MAC addresses of VoD users indicate that
services are functioning properly between the ONU and VoD users.
If the VPI/VCI is 0/35 and the ADSL2+ port is 0/2/0, run the following command to
query the learned MAC addresses of VoD users:
huawei(config)#display mac-address service-port 301
Command:
display mac-address service-port 301
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
: 0/3/0
: 0/3/23
: Test Succeed
: 0/3/1 //*Use an ETH port as an example.
: online
: no-auth
: MAC-based
: 0
: 0
: enable
: -
: IGMP v3
: 91
: disable
: no-limit
: 5000
: -
: -
: -
VLAN IP/MAC
1000 224.1.1.10
State Start-time
watching 2011-07-13
14:41:18
972