Configuring The Sip-Based Voice Service (Through The Cli) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
----End

10.6.1.8 Configuring the SIP-based Voice Service (Through the CLI)

The OLT manages ONUs and applies VoIP configurations to the ONU using the OMCI protocol.
This topic describes how to configure the SIP-based voice service.
Prerequisites
l
l
l
l
Data Plan
Item
ONU line profile
Issue 01 (2014-04-30)
8. Check the registration status of a voice user.
In the navigation tree, choose Status > VoIP Information. In the right pane, User
Status is Up.
The SIP interface data and POTS user data corresponding to the MG interface have been
configured on the SIP server.
The connection between the OLT and the SIP server is set up. The OLT can ping the IP
address of the SIP server successfully.
The ONU has been added to the OLT. For details, see
OLT.
Different voice services require different ONU software versions. Before the configuration,
ensure that the current ONU software version supports SIP. For details, see relevant ONU
manuals.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10.6.1.3 Adding an ONU to an
Data
Profile name: ftth
T-CONT ID: 4
GEM port ID: 12
10 FTTD Configuration
765