Huawei SmartAX MA5603T Configuration Manual page 516

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
NOTE
To configure the Internet access service, you must configure SVLAN 100-based traffic streams on the
MA5600T/MA5603T/MA5608T and perform corresponding configurations on the HG. The configurations are
the same as those for common Internet access service, which are not described here.
Data Plan
Table 6-2
Table 6-2 Key data plan
Confi
gurati
on
Item
MPLS
LDP
Routin
g
protoc
ol
VPLS
PW
Issue 01 (2014-04-30)
provides the key data plan for the MA5600T/MA5603T/MA5608T.
Data
Remarks
l LSR ID:
MPLS must be enabled at
10.10.10.10
three layers.
l VLAN: 4001
l MPLS must be enabled
l MPLS must be enabled
l MPLS must be enabled at
l MPLS LDP is
MPLS LDP must be enabled
enabled.
at three layers.
l Split horizon is
l MPLS LDP must be
enabled.
l MPLS LDP must be
The Open Shortest
Ensure that the Layer 3
Path First (OSPF)
interfaces on the MA5600T/
protocol is used.
MA5603T/MA5608T and
those on PE3 and PE4 can
ping each other.
l PW ID: 1 and 2
On the MA5600T/
MA5603T/MA5608T, PW1
l Service type:
and PW2 are created for PE3
vpls
and PE4 respectively. In this
l Encapsulation
way, packets can be
type: ethernet
transmitted to BRAS devices
tagged
over two trails.
l The control
word is enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
globally.
for VLAN.
VLAN interfaces.
enabled globally.
enabled at VLAN
interfaces.
6 Configuration Example of VPLS
Requirement on PE3 and
PE4
The LSR ID must be unique
on the entire network and
MPLS must be enabled.
MPLS LDP is enabled. The
remote LDP session to the
MA5600T/MA5603T/
MA5608T is configured on
PE3 and PE4.
Layer 3 interfaces and routes
are configured on PE3 and
PE4. Ensure that the Layer 3
interfaces and LSR IDs on
PE3 and PE4 and those on the
MA5600T/MA5603T/
MA5608T can ping each
other.
The LDP VPLS is supported.
VPLS PWs to the MA5600T/
MA5603T/MA5608T are
configured on PE3 and PE4,
and attributes of PWs are
consistent with those on the
MA5600T/MA5603T/
MA5608T.
491

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents