Huawei SmartAX MA5603T Configuration Manual page 910

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
Data plan
Table 11-9 Data plan
Item
DBA profile
Issue 01 (2014-04-30)
Table 11-8 Introduction to ONU profiles
Profile Function
Type
DBA A DBA profile describes GPON
profile traffic parameters. A T-CONT
is bound to a DBA profile for
dynamic bandwidth allocation,
improving upstream bandwidth
utilization.
Line A line profile describes binding
profile between the T-CONT and the
DBA profile, the QoS mode of
the service flow, and mapping
between the GEM port and the
ONU-side service.
Alarm An alarm profile contains a
profile series of alarm threshold
parameters that are used for
performance measurement and
monitoring of the activated
ONT lines.
An ONU can be added in two modes. Select either mode as required.
Mode Usage Scenario
Add an The ONU password or serial
ONU number (SN) is obtained.
offline.
Online Both the ONU password and SN
confirm are not obtained.
an ONU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Command
Query a DBA profile. display dba-
profile
Add a DBA profile. dba-profile add
Query a line profile. display ont-
lineprofile
Add a line profile. ont-lineprofile add
Query an alarm profile. display gpon
alarm-profile
Add an alarm profile. gpon alarm-
profile add
Command
Run the ont add command to add an
ONU.
In the GPON mode, run the port ont-
auto-find command to enable the ONU
auto-discovery function of a GPON port
and then run the ont confirm command
to add an ONU.
Data
Profile name: fttb_dba
Profile type: type3
Assured bandwidth: 8 Mbit/s
Maximum bandwidth: 20 Mbit/s
885