Huawei SmartAX MA5603T Configuration Manual page 198

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Procedure
Step 1 Configure the upstream VLAN interface for the media stream and the signaling stream.
The VLAN ID is 50, the VLAN type is smart VLAN, the upstream port is 0/19/0, and the IP
address of the VLAN interface is 10.50.1.10/24.
huawei(config)#vlan 50 smart
huawei(config)#port vlan 50 0/19 0
huawei(config)#interface vlanif 50
huawei(config-if-vlanif50)#ip address 10.50.1.10 24
huawei(config-if-vlanif50)#quit
NOTE
Step 2 Configure the media and signaling IP address pools.
The media and signaling IP addresses are 10.50.1.10/24, and the gateway IP address is 10.50.1.1.
huawei(config)#voip
huawei(config-voip)#ip address media 10.50.1.10 10.50.1.1
huawei(config-voip)#ip address signaling 10.50.1.10
huawei(config-voip)#quit
NOTE
Step 3 Configure a static route to the IMS.
The IP address of the destination network segment of the static route to the IMS is 10.10.1.0/24,
and the gateway IP address is 10.50.1.1.
huawei(config)#ip route-static 10.10.1.0 255.255.0.0 10.50.1.1
Step 4 Add a SIP interface.
SIP interface 0 is added.
huawei(config)#interface sip 0
Are you sure to add the SIP interface?(y/n)[n]:y
Step 5 Configure the basic attributes of the SIP interface.
The media and signaling IP addresses of the SIP interface are 10.50.1.10/24, the signaling port
ID is 5555, the transmission protocol is UDP (default setting), the IP address 1 of the primary
proxy server is 10.10.1.1/24, the port ID of the primary proxy server is 5555, the IP address 1
of the secondary proxy server is 10.10.1.2/24, the port ID of the secondary proxy server is 5555,
the home domain name is MA5600T/MA5603T/MA5608T.com, and the profile index is 0.
huawei(config-if-sip-0)#if-sip attribute basic media-ip 10.50.1.10 signal-ip
10.50.1.10 signal-port 5555 transfer udp primary-proxy-ip1 10.10.1.1 primary-proxy-
port 5555
secondary-proxy-ip1 10.10.1.2 secondary-proxy-port 5555 home-domain MA5600T/
MA5603T/MA5608T.com sipprofile-index 0
Step 6 Configure the optional attributes of the SIP interface.
The domain name of the SIP interface is huawei.com, and the phone context is +86755.
huawei(config-if-sip-0)#if-sip attribute optional mg-domain huawei.com phone-
context +86755
Step 7 Reset the SIP interface.
huawei(config-if-sip-0)#reset
Are you sure to reset SIP interface?(y/n)[n]:y
huawei(config-if-sip-0)#quit
Issue 01 (2014-04-30)
If the packet transmitted from the upstream port is untagged, run the native-vlan command to configure
the native VLAN of the upstream port to be the same as the VLAN of the upstream port.
When configuring the SIP interface attributes, ensure that the media and signaling IP addresses exist in the
corresponding address pools.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
173