Saving And Backing Up Data; Manually Saving And Backing Up Data - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Read temperature fault
Fan block
Temperature high
Power fault
----------------------------------------------------------------------------

1.3.17 Saving and Backing Up Data

The MA5600T/MA5603T/MA5608T supports data saving and backup to upgrade the system
or to recover the system in case of an upgrade failure or any other critical events.

1.3.17.1 Manually Saving and Backing Up Data

This topic describes how to manually save data to the flash memory or back up data to the server
in case of data loss caused by an unexpected system restart.
Prerequisites
The file transfer mode is configured. For detailed configurations, see
l
l
l
NOTE
Procedure
l
Issue 01 (2014-04-30)
Configuring the FTP Transfer Mode
Configuring the SFTP Transfer Mode
Configuring the TFTP Transfer Mode
You need to configure only one of the above-mentioned three file transfer modes. You are advised to use
SFTP mode.
Manually save data.
System data files are saved manually.
The system data files include the database file and the configuration file.
the commands for manually saving the data files and describes command functions.
Table 1-42 List of commands for manually saving the data files
Operation
Manually save the database
file
Manually save the
configuration file
Manually save the database
file and the configuration
file
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Permit
Permit
Permit
Permit
Command
save data
save configuration
save
1 Commissioning
Table 1-42
Function
Saves only the database file
but not the configuration
file.
Saves only the
configuration file but not
the database file.
Saves the database file and
the configuration file.
lists
127