Adding A Board Offline - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide

1.3.11.1 Adding a Board Offline

This topic describes how to add a board to an idle slot that is consistent with the board actually
planned beforehand to ensure that the board runs immediately the board is installed in the slot.
Prerequisites
The slot to which a board is added must be idle.
Context
l
l
Procedure
Step 1 Run the board add command to add a board offline.
NOTE
Step 2 Run the display board frameid [ /slotid ] command to query the type of the added board.
----End
Result
The type of the added board is the same as the board type that is planned. When a board is
installed in the slot in which the board is added, the board status is displayed as Normal.
Example
To add a service board GPBD offline in slot 0/2, do as follows:
huawei(config)#board add 0/2 h802gpbd
0 frame 2 slot board added successfully
huawei(config)#display board 0/2
---------------------------------------
Board Name
Board Status
---------------------------------------
-------------------------------------------------------------
-------------------------------------------------------------
Issue 01 (2014-04-30)
The boards other than the control board can be added offline.
After a board is added offline, the board status is displayed as Failed. The board status
becomes normal only when a board of the same type as the board added offline is installed
in the slot. If a board of a different type is installed, the board resets repeatedly due to the
board type mismatch.
l The shelf ID and the slot ID of the board added offline must be the same as the actual position.
Otherwise, when the board is installed, the board status cannot be changed to normal.
l The type of the board added offline must be the same as the type of the board installed. Otherwise,
when the board is installed, the board status cannot be changed to normal.
: H802GPBD
: Failed
Port Port min-distance
type (km)
0 GPON 0
1 GPON 0
2 GPON 0
3 GPON 0
4 GPON 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
max-distance Optical-module
(km) status
20
20
20
20
20
1 Commissioning
-
-
-
-
-
72