Gpon Access: Configuring Fttd Service; Bridging+Voice Onu Network Scenario (Ma5652S) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
NOTE
l IPTV service is a closed service self-operated by carriers, and single-tagged S-VLAN is recommended.
l The same S-VLAN or different S-VLANs can be used as the M-VLAN and VoD VLAN. It is recommended
that you use different S-VLANs as M-VLAN and VoD VLAN so that the upper-level device easily
differentiates between the BTV service and VoD service.
l S-VLANs of VoD service can identify services and physical locations based on an entire network or an
OLT. It is recommended that you set different VoIP VLANs for the OLTs connected to one VoIP SR to
avoid an excessively large broadcast domain of the VoIP SR and convergence switch.

10.6 GPON Access: Configuring FTTD Service

This topic describes how to configure the Internet access service, voice service, BTV service
and VoD service in GPON access mode in FTTD network scenario.
Context
There are two GPON configuration modes: distributed mode (also called discrete mode) and
profile mode. The difference between the two modes lies in command lines.
l
l
Generally, the GPON configuration mode is determined in a new deployment and will not be
changed. This chapter describes how to configure the enterprise access service in PON profile
mode (which is the default mode). You can run the commands in the following table to query
the GPON configuration mode.
Mode
PON profile
mode
NOTE
For commands for the distributed configuration mode, see PON distributed-mode commands in the Command
Reference.

10.6.1 Bridging+Voice ONU Network Scenario (MA5652S)

This topic describes how to configure Internet access service, voice service, BTV service and
VoD service when bridging+voice ONUs are used to build an FTTD network.
Issue 01 (2014-04-30)
Distributed mode: In this mode, ONUs need to be configured one by one but not in batches.
Profile mode: In this mode, an ONU line profile and service profile are configured first.
Then, ONUs can be added in batches by binding profiles. This mode greatly improves
service provisioning efficiency.
Query Method
huawei(config)#diagnose
huawei(diagnose)%%display xpon mode
---------------------------------------------------
---------------------------------------------------
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Current config mode: Profile-mode
10 FTTD Configuration
740