Huawei SmartAX MA5603T Configuration Manual page 525

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Figure 6-3 Networking for the VPLS enterprise private line service
Prerequisite
QinQ traffic streams have been configured on PE1-PE4 for the private line service of different
branch offices.
NOTE
To configure the Ethernet-based enterprise private line service, you must configure QinQ VLAN-based Ethernet
traffic streams on PE1-PE4, and perform corresponding configurations on routers for branch offices of the
enterprise. The configurations are the same as those for common QinQ VLAN private line service, which are
not described here.
Data Plan
Table 6-4
Issue 01 (2014-04-30)
PW1
PE1
Branch A
provides the key data plan for the OLT/MSAN (MA5600T/MA5603T/MA5608T).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PE2 (CX600)
PW2
(Master)
VPLS
PW3
(Slave)
PW4
OLT/MSAN
6 Configuration Example of VPLS
Branch C
CE
PE3 (CX600)
PE4
Branch B
VPLS PW
500