Huawei SmartAX MA5603T Configuration Manual page 62

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Parameter
Last Access Type
Last IP-Address
Last Login Time
Login Failure Times
All user fail login
information
Access Type
IP-Address
Time
Login Times
----End
Result
After logging in to the system, you can maintain and manage the MA5600T/MA5603T/
MA5608T.
NOTE
Follow-up Procedure
l
l
Issue 01 (2014-04-30)
To improve the system security, please modify your password after first login. You can run the terminal
user password command to modify your password.
You can run the idle-timeout command to set the terminal timeout time. if you do not input
commands within the specified timeout time, the system disconnects the terminal. By
default, the terminal timeout time is set to 5 minutes. If you do not run any commands
within 5 minutes, the system disconnects with the terminal. To perform any operation, you
must have to log in to the system again.
In the commissioning procedure, you must use the command, It is recommended that you
know well the command modes
Figure 1-22
Login
enable
User mode
huawei>
quit disable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates the access type of the latest failed login.
Indicates the IP address of the latest failed login.
Indicates the time of the latest failed login.
Indicates the failed login times. It is the times of login failures
between two login successes, but not the accumulative login
failures.
Indicates the information about failed login of all users, which
can be viewed only by user root or security administrator.
Indicates the access type of the login.
Indicates the IP address of the login.
Indicates the time of the login.
Indicates the login times.
first.Figure 1-22 shows how to switch command modes.
config
Global config mode
Privilege mode
huawei# huawei(config)#
quit
1 Commissioning
Interface/config mode
interface
huawei(config-if-...)
quit
return
37