Configuring The File Transfer Mode - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
FAN
ESC
Route protocol
The following displays the commands that need to be included in the script according to the
preceding data plan.
Each command in the script must end with a carriage return (CR).
enable
config
board add 0/21 H801PRTE
board add 0/22 H801PRTE
emu add 0 FAN 0 1 FAN
interface emu 0
fan speed mode automatic
quit
emu add 1 H801ESC 0 15 H801ESC
vlan 100 standard
port vlan 100 0/19 0
interface vlanif 100
ip address 10.50.1.10 24
quit
ip route-static 10.10.1.0 24 10.50.1.1
save

1.6.2 Configuring the File Transfer Mode

This topic describes how to configure the file transfer mode of the FTP,SFTP, Xmodem and
TFTP. SFTP with high security is recommended.
Issue 01 (2014-04-30)
Data
l SN: 0
l Sub-node ID: 1 (default)
l Name: FAN
l Fan speed adjustment mode: automatic
l SN: 1
l Sub-node ID: 15 (default)
l Name: H801ESC
l Upstream port: 0/19/0
l Management VLAN ID: 100; type: Standard VLAN
l IP address of the L3 interface of the management VLAN:
10.50.1.10/24
l Gateway address: 10.50.1.1/24
l IP address of the target network segment: 10.10.1.10/24
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
194