SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
----End
10.6.2.8 Configuring the VoD Service
The OLT is connected to the remote bridging ONU through a GPON port to provide users with
the VoD service.
Prerequisites
l
l
l
l
l
Issue 01 (2014-04-30)
Parameter
Bearing
service
VLAN
enabling
VLANID
[1-4094]
Binding item
Mode
DHCP
transparent
transmission
c.
Click OK to save the settings.
3.
Restart the HGW.
Choose Management > Device Management and click Restarting the Device.
The OLT is connected to the BRAS and the program source.
The VLAN of the LAN switch port connected to the OLT is the same as the upstream
VLAN of the OLT.
The ONU has been added to the OLT. For details, see
OLT.
A VDSL2 port has been activated. For details, see
Port.
The configuration processes on HGWs of different models or in different appearances are
similar. This topic describes how to configure the Internet access service on an HG239 that
is connected to an ONT upstream through a LAN.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
OTHER: The connection is used for the BTV service.
Enable VLAN tags are added to upstream packets.
NOTE
When BTV service flows are created on the OLT, the value is
Disable if uservlan is untagged and the value is Enable if
uservlan is tagged.
VLAN ID corresponding to the user VLAN value for BTV
service flows created on the OLT. In this example, set this
parameter to 43.
LAN3
Bridge
Enable
10.6.1.4 Configuring a VDSL2 User
10 FTTD Configuration
10.6.1.3 Adding an ONU to an
807