Networking Scenarios And Hardware Configurations (Gpon) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Network Side
Concept
User-facing
provider edge (U-
PE)
Aggregation
provider edge (PE-
AGG)
NGN or IP
multimedia
subsystem (IMS)
IPTV head end
9.3 Networking Scenarios and Hardware Configurations
(GPON)
This section describes fiber to the home (FTTH) networking scenarios and hardware
configurations of an optical line terminal (OLT) and optical network terminals (ONTs).
Issue 01 (2014-04-30)
Description
A supplier routing device that connects to the router of a customer edge
(CE), which is an OLT in this document. The U-PE supports routing and
Multiprotocol Label Switching (MPLS) encapsulation. If a U-PE
connects to multiple CEs, the U-PE supports basic bridging functions.
In this case, the U-PE forwards data frames, which reduces the load of
switching provider edges (S-PEs).
An aggregation router, which provides aggregation and route
forwarding functions for access devices. Compared with U-PEs, PE-
AGGs provides fewer ports and higher performance and switching rates.
A type of network that centers around softswitches and uses an open and
standardized architecture. It provides voice, video, and data services.
A type of system that uses Session Initiation Protocol (SIP) signaling as
its call control signaling. It provides voice, data, and multimedia
services.
NOTE
In this document, the NGN or IMS is the softswitch that supports H.248 or SIP.
A contents preparation platform in the IPTV system. It receives signals,
converts media formats, and manages media materials.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
549