Huawei SmartAX MA5603T Configuration Manual page 197

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Figure 1-77 Example network for commissioning the interconnection with the SIP interface
Phone
Figure 1-78
Figure 1-78 Flowchart for commissioning the interconnection with the SIP interface
Prerequisites
l
l
Issue 01 (2014-04-30)
Access node
SIP
VLAN:50
10.50.1.10/24
shows the flowchart for commissioning the interconnection with the SIP interface.
The data configuration on the IMS side (corresponding to the data configuration on the
MA5600T/MA5603T/MA5608T side) must be correct.
The current system must use the SIP protocol.
NOTE
Run the display protocol support command to query the current voice protocol. If the voice protocol
is not SIP, run the protocol support sip command to change it to SIP.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Router
10.50.1.1/24
1 Commissioning
IMS
IP1:10.10.1.1/24
IP2:10.10.1.2/24
172