Huawei SmartAX MA5603T Configuration Manual page 870

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
VoIP user
configuratio
n data
Issue 01 (2014-04-30)
Signaling port ID
IP address of primary MGC
(H.248)/IP address of primary
IMS device (SIP)
Port ID of primary MGC
(H248)/port ID of primary
IMS device (SIP)
Codec mode
Transmission mode
Home domain name (SIP)
Profile index (SIP)
H.248 version used for starting
negotiation
Phone number
TID (H.248)
User priority
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Remarks
Choose the transmission method according
to the requirement on the MGC/IMS side.
When dual homing is not configured, the
parameters of the primary MGC need to be
configured. When dual homing is
configured, the IP address and the port ID of
the secondary MGC must also be configured.
The codec mode is selected according to the
requirements on the MGC/IMS side.
Generally, the text mode is used.
The transmission mode is selected according
to the requirements on the MGC/IMS side.
Generally, UDP is used.
-
-
V1, V2 or V3 (default value). The interface
may fail to register because some
softswitches do not support V3.
H.248: The phone numbers allocated by the
MGC need to be determined, and the paging
numbers for users' emergency standalone
need to be planned if the emergency
standalone function is provided.
SIP: The phone number that the IMS core
network device allocates to the user must be
configured.
If the TID template with which the PSTN
user is bound does not support terminal
layering, this parameter needs to be
configured.
According to the service requirements, user
priorities must be specified. The user
priorities include the following:
l cat1: government1 (category 1
government users)
l cat2: government2 (category 2
government users)
l cat3: normal (common users). This is the
default value.
845