Configuring The Vod Service - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
9.
10. (Optional) Set multicast global parameters.
11. Configure multicast users.
12. Save the data.
Step 2 The ONT does not need to be configured.
----End

9.7.3.10 Configuring the VoD Service

The OLT is connected to the remote gateway ONT through a GPON port to provide users with
the VoD service.
Prerequisites
l
l
l
l
Data Plan
Item
ONT line profile
Issue 01 (2014-04-30)
Command is being executed. Please wait...
Command has been executed successfully
Configure the IGMP upstream port.
Set the IGMP upstream port ID to 0/19/0 and working mode to default. Protocol packets
are transmitted to all the IGMP upstream ports in the multicast VLAN.
huawei(config-mvlan1000)#igmp uplink-port 0/19/0
huawei(config-mvlan1000)#btv
huawei(config-btv)#igmp uplink-port-mode default
Are you sure to change the uplink port mode?(y/n)[n]:y
In this example, the default settings are used for all the multicast global parameters.
Add service ports 1 and 2 as multicast users.
huawei(config-btv)#igmp user add service-port 1
huawei(config-btv)#igmp user add service-port 2
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 1
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 2
huawei(config-mvlan1000)#quit
huawei(config)#save
The iTMS has configured the IPTV WAN ports on the ONT.
The OLT has been connected to the BRAS and the program source.
The VLAN of the LAN switch port connected to the OLT is the same as the upstream
VLAN of the OLT.
The ONT has been added to the OLT. For details, see
OLT.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
Profile name: ftth
T-CONT ID: 4
GEM port ID: 13
9 FTTH Configuration
9.7.1.3 Adding an ONT to an
700