Example: Configuring The Internet Access Service In The Xdsl 802.1X Mode - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
mac-pool xpoa 0000-1111-1010 300
ipoa enable
ipoa default gateway 192.168.1.20
encapsulation 0/4/1 vpi 1 vci 39 type ipoa llc srcIP 192.168.1.1
save
3.1.5 Example: Configuring the Internet Access Service in the xDSL
802.1X Mode
This topic describes how to configure a user to access the MA5600T/MA5603T/MA5608T in
the xDSL mode, and then access the Internet in the 802.1X authentication mode at a rate of 2048
kbit/s.
Service Requirements
l
l
l
l
Figure 3-5
Figure 3-5 Example network of the Internet access service in the xDSL IPoE mode
Prerequisite
l
l
Procedure
Step 1 Configure a VLAN.
Configure S-VLAN 50 with the stacking attribute. The user packet goes upstream carrying two
VLAN tags. The outer VLAN tag identifies the service and the inner VLAN tag identifies the
Issue 01 (2014-04-30)
The user accesses the Internet in the 802.1X authentication mode and is authenticated
locally.
User packets are tagged with two VLAN tags and then transmitted upstream. The outer
VLAN tag is used to identify the service. The inner VLAN tag is used to identify the user.
The service of each user is identified by S+C, which is a 1:1 access scenario.
The user access rate is 2048 kbit/s, which is restricted by the traffic profile.
Dual GE ports are adopted for upstream transmission to ensure reliability. Link aggregation
is configured for the two upstream ports.
shows an example network of the Internet access service in the xDSL 802.1X mode.
The user already installs the client software that supports 802.1X.
The user name and the password for authentication are already configured properly on the
RADIUS server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
280