Huawei SmartAX MA5603T Configuration Manual page 356

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
Procedure
Step 1 Configure the working mode of the ISDN BRA port.
In the BRA port mode, configure the working mode of the ISDN BRA port to P2P, configure
the activation mode to stable activation, and disable automatic activation.
huawei(config)#braport
huawei(config-braport)#braport attribute set 0/2/0 workmode p2p activemode stable-
active autodeactive disable
huawei(config-braport)#braport attribute set 0/3/0 workmode p2p activemode stable-
active autodeactive disable
huawei(config-braport)#quit
Step 2 Add an IUA link set and IUA links.
In the SIGTRAN mode, configure the SIGTRAN protocol stack. Add an IUA link set, and then
add IUA links.
huawei(config)#sigtran
huawei(config-sigtran)#iua-linkset add 1 mgid 0 jointly-work enable trafficmode
override
iid-map 2 pendingtime cs-mode client
huawei(config-sigtran)#iua-link add 15 1 1401 10.13.4.116 1400 10.14.1.2
jointly-work-with primary-mgc priority 3
huawei(config-sigtran)#quit
NOTE
Step 3 Configure the ISDN BRA user data.
huawei(config)#esl user
huawei(config-esl-user)#mgbrauser add 0/2/0 0 1 interfaceid 8 terminalid 100 telno
12345601
huawei(config-esl-user)#mgbrauser add 0/3/0 0 1 interfaceid 9 terminalid 110 telno
12345602
huawei(config-esl-user)#quit
Issue 01 (2014-04-30)
Phone number
Automatic
deactivation
Activation
mode
All the ISDN call control messages are sent from the IUA link to the softswitch, whereas the system uses
the bearer control messages to communicate with the softswitch through H.248.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
Data
12345601, 12345602
Disabled
Stable activation
331