Configuring The Sftp Transfer Mode - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
NOTE
Step 4 (Optional; this step is required when the function of database file auto-backup is used.) On the
MA5600T/MA5603T/MA5608T, run the file-server auto-backup data command to configure
the FTP user name, password, and port ID.
huawei(config)#file-server auto-backup data primary 10.10.20.1 ftp path test user
User Name(<=40 chars):huawei
User Password(<=40 chars):huawei//The input is not displayed on the CLI.
----End
Reference
l
l

1.6.2.2 Configuring the SFTP Transfer Mode

This topic describes how to configure the SFTP transfer mode for transferring (uploading or
downloading) files through the inband or outband Ethernet port of the MA5600T/MA5603T/
MA5608T. After the configuration, the SFTP server and the MA5600T/MA5603T/MA5608T
can communicate to transfer files in the SFTP mode.
Prerequisites
l
l
Tools, Meters, and Materials
l
l
Impact on System
None
Precautions
Make sure that the crossover cable is used to directly connect the SFTP server to the MA5600T/
MA5603T/MA5608T. In other cases, a straight-through cable is used.
Issue 01 (2014-04-30)
By default, the FTP user name is anonymous and the password is anonymous@huawei.com in the
MA5600T/MA5603T/MA5608T system.
Any PC that runs the FTP software can serve as an FTP server.
In the FTP file transfer mode, the user name and the password must be authenticated. Apart
from setting the user name and password on the FTP server, you also need to set the FTP
user name and password on the FTP client (such as the MA5600T/MA5603T/MA5608T),
and make sure that the settings at both ends are the same.
The Ethernet port of the SFTP server is directly connected to the inband or outband Ethernet
port of the MA5600T/MA5603T/MA5608T.
– Connect to the inband Ethernet port (Maintenance port) through the crossover cable.
– Connect to the outband Ethernet port (Upstream port) through the direct cable.
You have logged in to the MA5600T/MA5603T/MA5608T remotely from the console
(maintenance terminal), and have entered the global config mode.
Crossover cable
Direct cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
196