Scenario And Hardware Configuration (10G Gpon) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Scenario

11.1.3 Scenario and Hardware Configuration (10G GPON)

The typical 10G GPON FTTB and FTTC networking scenarios and their OLT and ONU
hardware configurations are listed in the table below.
Scenario
FTTB Networking
(LAN Access
Without HGW)
FTTB/C
Networking (xDSL
Access Without
HGW)
FTTB/C+HGW
Networking (ONU
Providing the VoIP
Service)
Issue 01 (2014-04-30)
Description
Description
l The ONU is deployed in the building and
is connected to the user's home through
the category-5 cable.
l The ONU provides FE and POTS ports
for the Internet access and VoIP services.
l The ONU is deployed in the building or
street fiber distribution terminal and is
connected to the user's home through the
twisted pair cable.
l The ONU provides xDSL and POTS ports
for the Internet access and VoIP services.
l The ONU is deployed in the building or
street fiber distribution terminal and uses
LAN or xDSL to connect to the HGW
deployed at user's home. The HGW
provides service access interfaces and the
built-in IAD of the ONU provides the
VoIP service.
l The HGW provides the Internet access
and IPTV services by connecting to the
upstream ONU using LAN or xDSL.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
OLT Typical
Configuration
(Main Control Board
+
Service Board
+Upstream Board)
MDU
Configuration
MA5611S-DE48-
A, MA5603T.
MDU
Configuration
ONUs applicable to
this scenario:
l MA5616
l MA5822
ONUs applicable to
this scenario:
MA5616
ONUs applicable to
this scenario:
l MA5616
l MA5822
821