Configuring The Environment Monitoring Parameters Of The Eps30-4815Af - Huawei SmartAX MA5603T Configuration Manual

Access module

Hide thumbs Also See for SmartAX MA5603T:

Table of Contents

SmartAX MA5600T/MA5603T/MA5608T Multi-service

Access Module

Commissioning and Configuration Guide

----------------------------------------------------------------------------

Used or not : Used

----------------------------------------------------------------------------

huawei(config)#interface emu 2

huawei(config-if-h801vesc-2)#vesc digital 0 available-level low-level name

huawei(config-if-h801vesc-2)#vesc digital 1 available-level low-level name Door

huawei(config-if-h801vesc-2)#vesc digital 2 available-level low-level name

huawei(config-if-h801vesc-2)#vesc digital 3 available-level low-level name Fan

huawei(config-if-h801vesc-2)#display vesc environment info

---------------------------Digital environment info-------------------------

----------------------------------------------------------------------------

huawei(config-if-h801vesc-2)#quit

huawei(config)#save

1.3.16.4 Configuring the Environment Monitoring Parameters of the EPS30-4815AF

This topic describes how to configure the environment monitoring parameters of the

EPS30-4815AF through the CLI.

Mapping Between Monitoring Parameters and Device Ports

transfer box.

Table 1-25 Mapping between the monitoring parameters displayed on the host and the ports on

the sensor transfer box

Monitoring Parameter Displayed on the

Issue 01 (2014-04-30)

describes the mapping between the monitoring parameters displayed on the sensor

Huawei Proprietary and Confidential

VESC environment state

Value |ID Name

1 Commissioning

Show Quick Links

Table of Contents

Smartax ma5600t Smartax ma5608t