Configuring The Environment Monitoring Parameters Of The Eps75-4815Af - Huawei SmartAX MA5603T Configuration Manual

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
name Smoke digital-alarm 15
huawei(config-if-power4830l-0)#power outside-digital 5 available-level low-level
name HEX digital-alarm 13
huawei(config-if-power4830l-0)#power outside-digital 6 available-level low-level
name MDF-door digital-alarm 9
huawei(config-if-power4830l-0)#display power system parameter
huawei(config-if-power4830l-0)#display power environment parameter
huawei(config-if-power4830l-0)#display power alarm
huawei(config-if-power4830l-0)#quit
huawei(config)#save

1.3.16.5 Configuring the Environment Monitoring Parameters of the EPS75-4815AF

This topic describes how to configure the environment monitoring parameters of the
EPS75-4815AF through the CLI.
Mapping Between Monitoring Parameters and Device Ports
Table 1-28
transfer box.
Table 1-28 Mapping between the monitoring parameters displayed on the host and the ports on
the sensor transfer box
Monitoring
Parameter
Displayed on
the Host
Digital 0
Digital 1
Digital 2
Digital 3
Issue 01 (2014-04-30)
describes the mapping between the monitoring parameters displayed on the sensor
Device Port
JTD1
JTD2
JTD3
JTD4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Application in the N66
Cabinet
Not connected by default,
used to add a user-defined
monitoring digital
parameter
Not connected by default,
used to add a user-defined
monitoring digital
parameter
Not connected by default,
used to add a user-defined
monitoring digital
parameter
Not connected by default,
used to add a user-defined
monitoring digital
parameter
1 Commissioning
Application in the
F01D500 Cabinet
Not connected by
default, used to add a
user-defined
monitoring digital
parameter
Not connected by
default, used to add a
user-defined
monitoring digital
parameter
Not connected by
default, used to add a
user-defined
monitoring digital
parameter
surge protector
95

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents