Configuring The Btv Service - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
3.
4.
Step 10 (Optional) Configure the SIP user codec.
Run the sippstnuser codec command to configure the SIP user codec. The SIP user codec will
not be configured independently in this example.
Step 11 Save the data.
huawei(config)#save
----End

9.7.3.9 Configuring the BTV Service

The OLT is connected to the remote gateway ONT through a GPON port to provide users with
the bridge WAN multicast service.
Prerequisites
l
l
l
l
Data Plan
Table 9-6 Data plan
Item
ONT line profile
Issue 01 (2014-04-30)
In this example, the default SIP service data profile, namely SIP service data profile 1 is
used.
Apply a POTS port profile.
Run the pstnport electric command to apply a POTS port profile to an SIP interface or
configure the interface customized parameters, or run the ont-pstnport electric bat-
apply command to bulk apply the POTS port profiles to SIP interfaces. If you use these
two commands to apply the POTS port profiles or configure the interface customized
parameters repeatedly, the last configurations take effect.
In this example, the default POTS port profile, namely POTS port profile 1 is used.
Bind a digitmap profile.
Run the sippstnuser digitmap command to bind a digitmap profile to an SIP interface, or
run the ont-sippstnuser bat-bind from command to bulk apply the digitmap profiles to
SIP interfaces. If you use these two commands to bind the SIP service data profiles to SIP
ports repeatedly, the last configurations take effect.
In this example, the default digitmap profile, namely digitmap profile 1 is used.
The iTMS has configured the IPTV WAN ports on the ONT.
The OLT has been connected to the BRAS and the multicast source.
The VLAN of the LAN switch port connected to the OLT is the same as the upstream
VLAN of the OLT.
The ONT has been added to the OLT. For details, see
OLT.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
Profile name: ftth
T-CONT ID: 4
GEM port ID: 13
9 FTTH Configuration
9.7.1.3 Adding an ONT to an
697