Huawei SmartAX MA5603T Configuration Manual page 741

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
----End
Result
l
l
Issue 01 (2014-04-30)
f. Configure an IGMP upstream port.
Set the IGMP upstream port to port 0/19/0 and working mode to default. Protocol
packets are transmitted to all the IGMP upstream ports in the multicast VLAN.
huawei(config-mvlan1000)#igmp uplink-port 0/19/0
huawei(config-mvlan1000)#btv
huawei(config-btv)#igmp uplink-port-mode default
Are you sure to change the uplink port mode?(y/n)[n]:y
g. (Optional) Set the multicast global parameters.
In this example, the default settings are used for all the multicast global
parameters.
h. Configure a program library.
Configure the IP address of the multicast program to 224.1.1.10, program name
to program1, and program source IP address to 10.10.10.10.
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp program add name program1 ip 224.1.1.10
sourceip
10.10.10.10
i. Configure a right profile.
Configure a profile named profile0, with the right of watching program 1.
huawei(config-mvlan1000)#btv
huawei(config-btv)#igmp profile add profile-name profile0
huawei(config-btv)#igmp profile profile-name profile0 program-name
program1 watch
j. Configure multicast users.
Configure users of service ports 5 and 6 as multicast users and bind right profile
profile0 to the service ports.
huawei(config-btv)#igmp user add service-port 5 auth
huawei(config-btv)#igmp user add service-port 6 auth
huawei(config-btv)#igmp user bind-profile service-port 5 profile-name
profile0
huawei(config-btv)#igmp user bind-profile service-port 6 profile-name
profile0
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 5
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 6
huawei(config-mvlan1000)#quit
7. Save the data.
huawei(config)#save
Configure the ONT.
The ONT does not need to be configured for the Internet access service and multicast
service. For the voice service, configurations on the ONT are consistent with those in the
profile mode.
Use the PPPoE dialup software to dial on the PC. After the dialup is successful, the user
can access the Internet.
Connect two phones to two TEL ports of different ONTs, and subscribers can use these
two phones to call each other.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
716