SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Table 11-22 Vectoring configuration items
Item
Global band
plan
Global
vectoring
configurations
Issue 01 (2014-04-30)
Function
In the vectoring
algorithm, the system
requires that the
upstream band and
downstream band are
separate from each
other. Therefore, the
band plan must be
globally configured.
Vectoring
configurations take
effect only when
vectoring is globally
enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Description
l The band plan can
be globally
configured only
when vectoring is
globally enabled.
l After vectoring is
globally enabled, if
the band plan
configured for the
line profile is
incompatible with
the band plan
globally configured
for vectoring and
the upstream band
plan and
downstream band
plan are not
separate from each
other, the port
cannot be
activated.
l Before enabling
vectoring, globally
configure the band
plan.
NOTE
Services in a
vectoring group port
are interrupted
when the vectoring
function is enabled
or disabled.
Commands
xdsl vectoring
bandplan-type
xdsl vectoring
942