Loading A Configuration Script - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
-------------------------------------------------------------------------
SlotID
-------------------------------------------------------------------------
0
1
2
3
4
5
6
7
8
9
10
11
12
---- More ( Press 'Q' to break ) ----

1.3.7 Loading a Configuration Script

You can run the commands in the configuration script in batches by loading the configuration
script instead of running the commands one by one. This shortens the commissioning duration
and improves the commissioning efficiency. If you do not use the configuration script to perform
the commissioning, skip this operation, and follow the commissioning procedure to perform the
subsequent operations.
Prerequisites
l
l
l
l
Procedure
l
Issue 01 (2014-04-30)
BoardName Status
H802ADPD Normal
H805ADPD Normal
H801EPBA Normal
H801GPBC Normal
H802SHLB Normal
H801SCUN Active_normal
H802EDTB Normal
The hardware must be installed and checked.
The configuration script must be prepared. For details about how to prepare a configuration
script, see 1.6.1 Script Making.
The TFTP/FTP/SFTP server can normally communicate with the device, and the file path
on the server is set correctly before you load the configuration script. For the detailed
operation procedure, see
The operator is in the privilege mode.
There are two methods for loading the configuration script. You can select one of them.
– Importing the configuration script
1. Run the load configuration command to load the configuration script on the file
server (TFTP/FTP/SFTP server) to the control board of the device.
2. Run the active configuration system command to activate the configuration.
3. Log in to the system using the user name root and password admin after the system
restarts.
4. Run the save command to save the configuration file and make the new
configuration take effect.
– Copying commands in the configuration script
1. Open the configuration script, and copy the commands in the configuration script
to the command line interface (CLI). However, the following contents must be
deleted. Otherwise, the script loading will fail.
– Delete the following tags.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SubType0 SubType1
1.6.2 Configuring the File Transfer Mode
1 Commissioning
Online/Offline
.
63