Huawei SmartAX MA5603T Configuration Manual page 255

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Issue 01 (2014-04-30)
Parameter Code
3
4
5
6
7
14
15
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Parameter Name
Challenge-Password
NAS-IP-Address
NAS-Port
Service-Type
Framed-Protocol
Login-IP-Host
Login-Service
2 Basic Configurations
Description
Indicates the user password for
authentication. This parameter is
valid only for CHAP
authentication.
Indicates the IP address of the
access device. If the RADIUS
server group is bound to an
interface address, use the bound
interface address; otherwise, use
the address of the interface where
packets are sent.
Indicates the user access port.
The format of this parameter is
four-digit slot ID + two-digit
card number + five-digit port
number + 21-digit VLAN ID.
Indicates the user service type.
The value of this parameter is 2
(frame) for access users and is 6
for remote management users.
Currently, the MA5600T/
MA5603T/MA5608T supports
only 802.1x access users but not
PPP, L2TP, or DHCP access
users for RADIUS
authentication.
The value of this parameter is
fixed to 1 (PPP) because ITU-T
RFC 2856 does not define 802.1x
for this parameter.
Indicates the host IP address of a
login user.
Indicates the login service type.
The valid types are SSH, Rlogin,
TCP Clear, PortMaster
(proprietary), and LAT.
230