Huawei SmartAX MA5603T Configuration Manual page 703

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Issue 01 (2014-04-30)
k. Click OK.
2. Bind a general VAS profile.
a. In the Main Topology, double-click the required OLT in the Physical Root
navigation tree; or right-click the required OLT and choose NE Explorer from
the shortcut menu.
b. Choose GPON > GPON Management from the navigation tree.
c. In the window on the right, choose GPON ONU.
d. On the GPON ONU tab page, set the filter criteria or click
GPON ONUs.
e. Select an ONT from the list, right-click, and choose Bind General VAS
Profile from the shortcut menu. In the dialog box that is displayed, select the
created profile, and click OK to complete profile binding.
3. Configure the ONT VAS service.
a. On the GPON ONU tab page, select an ONT, right-click, and choose Configure
Value-Added Service from the shortcut menu.
b. Configure the domain name of the MG.
Click the Basic Parameters tab in the dialog box that is displayed, select Voice
Service, and set MG Domain name to 0100000001.
NOTE
Domain Name is ONT's domain name registered with the MGC. It is globally unique. MG
Domain Name in this example is ONT's password.
c. Configure the terminal ID for the H.248 voice user.
Select the record where Interface ID is 1, and set TID to A0. Select the record
where Interface ID is 2, and set TID to A1.
NOTE
Pay attention to the RTP TID configuration when the ONT is interconnected with a softswitch
of other vendors. The terminal IDs A0 and A1 must be consistent with the corresponding
configuration on the MGC.
Do not configure Directory Number.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
to display the
678