Huawei SmartAX MA5603T Configuration Manual page 509

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
2.
Issue 01 (2014-04-30)
> Transmission
mode:
> 0:
Custom
> 1: All (G.992.1~5,T1.413,G.
993.2)
> 2: Full rate(G.992.1/3/5,T1.413,G.
993.2)
> 3: G.DMT (G.992.1/3/5,G.
993.2)
> 4: G.HS (G.992.1~5,G.
993.2)
> 5: ADSL (G.
992.1~5,T1.413)
> 6: VDSL (G.
993.2)
> Please select (0~6)
[1]:
> Bit swap downstream 1-disable 2-enable (1~2)
[2]:
> Bit swap upstream
[2]:
> Please select the form of transmit rate adaptation
downstream:
> 1-fixed, 2-adaptAtStartup, 3-adaptAtRuntime (1~3)
[2]:
> Please select the form of transmit rate adaptation
upstream:
> 1-fixed, 2-adaptAtStartup, 3-adaptAtRuntime (1~3)
[2]:
> Will you set SNR margin parameters? (y/n)
[n]:
> Will you set DPBO parameters? (y/n)
[n]:
> Will you set UPBO parameters? (y/n)
[n]:
> Will you set power management parameters? (y/n)
[n]:
> Will you set RFI notch configuration parameter? (y/n)
[n]:
> Will you set ADSL tone blackout configuration parameter? (y/n)
[n]:
> Will you set VDSL tone blackout configuration parameter? (y/n)
[n]:
> Will you set mode-specific parameters? (y/n)
[n]:
> Will you set network timing reference? (y/n)
[n]:
> Will you set INM parameter? (y/n)
[n]:
> Will you set SOS downstream parameter? (y/n)
[n]:
> Will you set SOS upstream parameter? (y/n)
[n]:
Add profile 10 successfully
Configure the VDSL2 channel profile.
You can configure the VDSL2 channel profile based on your requirements.
huawei(config)#vdsl channel-profile add 10
Start adding
profile
Press 'Q' to quit the current configuration and new configuration will
be
neglected
> Do you want to name the profile (y/n)
[n]:
> Data path mode 1-ATM, 2-PTM, 3-Both (1~3) [3]:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuration Example of MSTP Subtending Network
1-disable 2-enable (1~2)
484