Configuring Xmodem File Transfer Mode - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Procedure
Step 1 On the SFTP server, configure the IP address of its Ethernet port.
Configure the Ethernet port IP address of the SFTP server according to the IP address planning
in the specific networking, and ensure that the Ethernet port of the SFTP server and the inband
or outband Ethernet port of the MA5600T/MA5603T/MA5608T can ping each other.
For example, if the Ethernet port of the SFTP server is directly connected to the MA5600T/
MA5603T/MA5608T, the IP address of this Ethernet port and the IP address of the inband or
outband Ethernet port of the MA5600T/MA5603T/MA5608T must be in the same subnet.
Step 2 On the SFTP server, run the SFTP application and set related parameters.
After running the SFTP application, set the path for saving the file, SFTP user name, password,
and port ID. The port ID is 22 by default.
Step 3 (This is step is used for setting the SFTP user attributes for the manual file transfer.) On the
MA5600T/MA5603T/MA5608T, run the ssh sftp set command to set the SFTP user name,
password, and port ID.
huawei(config)#ssh sftp set
User Name(<=40 chars):huawei
User Password(<=40 chars):huawei//The input is not displayed on the CLI.
Listening Port(0--65535):22
NOTE
Step 4 (Optional; this step is required when the function of database file auto-backup is used.) On the
MA5600T/MA5603T/MA5608T, run the file-server auto-backup data command to configure
the SFTP user name, password, and port ID.
huawei(config)#file-server auto-backup data primary 10.10.20.1 sftp path test port
22 user
User Name(<=40 chars):huawei
User Password(<=40 chars):huawei//The input is not displayed on the CLI.
NOTE
----End
Reference
l
l

1.6.2.3 Configuring Xmodem File Transfer Mode

This topic describes how to configure the Xmodem file transfer mode. To upload or download
files through the maintenance serial port on the MA5600T/MA5603T/MA5608T, configure the
Xmodem file transfer mode according to this operation guide. Then, the console and the
MA5600T/MA5603T/MA5608T can communicate with each other normally and transfer files
in Xmodem mode.
Issue 01 (2014-04-30)
The MA5600T/MA5603T/MA5608T system does not have default SFTP user name, password, or port ID.
The MA5600T/MA5603T/MA5608T system does not have default SFTP user name, password, or port ID.
Any PC that runs the SFTP software can serve as an SFTP server.
In the SFTP file transfer mode, the user name and the password must be authenticated.
Apart from setting the user name, password, and port ID on the SFTP server, you also need
to set the SFTP user name, password, and port ID on the SFTP client (such as the MA5600T/
MA5603T/MA5608T), and make sure that the settings at both ends are the same.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
197