Adding Port Description - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
l
l
l
l
huawei(config)#ont-alarm-policy policy-id 10
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e112003
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e112004
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e112006
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e313015
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e313016
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e313017
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e313018
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e313019
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e31301a
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e313024
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e313025
huawei(config-ont-alarm-policy-10)#alarm filter 0x2e31302a
huawei(config-ont-alarm-policy-10)#commit
huawei(config-ont-alarm-policy-10)#quit
huawei(config)#interface gpon 0/3
huawei(config-if-gpon-0/3)#ont alarm-policy 0 1 policy-id 10

2.2 Adding Port Description

This topic describes how to add port description.
Prerequisites
A board must be added to the system.
Context
After the description of a physical port on the board is added, the description facilitates
information query in system maintenance.
Procedure
Step 1 In the global config mode, run the port desc command to add port description.
Port description is a character string, used to identify a port on a board in a slot of a subrack.
Step 2 Run the display port desc command to query port description.
----End
Example
Plan the format of user port description as "community ID-building ID-floor ID/subrack ID-slot
ID-port ID". "Community ID-building ID-floor ID" indicates the physical location where the
user terminal is deployed, and subrack ID-slot ID-port ID" indicates the physical port on the
local device that is connected to the user terminal. This plan can present the user terminal location
and the connection between the user terminal and the device, which facilitates query in
maintenance. Assume that the user terminal that is connected to port 0/2/0 of the MA5600T/
Issue 01 (2014-04-30)
0x2e313019 (The voltage of the standby battery of the ONT is too low)
0x2e31301a (The shell of the ONT is opened)
0x2e313024 (The loss of signals occurs on the ethernet port of the ONT)
0x2e313025 (No signal is received in the video UNI of the ONT)
0x2e31302a (The E1/T1 port loss of signal (LOS) occurs at the ONT)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Basic Configurations
222