Huawei SmartAX MA5603T Configuration Manual page 696

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
Issue 01 (2014-04-30)
huawei(config)#traffic table ip name ftth_voip cir off priority 5 priority-
policy
local-setting
2. Configure the mapping relationship between a GEM port and a VLAN.
The service flow of user VLAN 300 is mapped to GEM port 12 in the ONT line profile.
huawei(config)#ont-lineprofile gpon profile-name ftth
huawei(config-gpon-lineprofile-1)#gem mapping 12 2 vlan 300
huawei(config-gpon-lineprofile-1)#commit
huawei(config-gpon-lineprofile-1)#quit
3. Create a service VLAN and add an upstream port to it.
Add upstream port 0/19/0 to VLAN 200.
huawei(config)#vlan 200 smart
huawei(config)#port vlan 200 0/19 0
4. Create service flows.
Set the service VLAN to 200, GEM port ID to 12, and user VLAN to 300. Use traffic
profile ftth_voip.
huawei(config)#service-port vlan 200 gpon 0/1/0 ont 1 gemport 12 multi-
service
user-vlan 300 inbound traffic-table name ftth_voip outboun
d traffic-table name ftth_voip
huawei(config)#service-port vlan 200 gpon 0/1/0 ont 2 gemport 12 multi-
service
user-vlan 300 inbound traffic-table name ftth_voip outboun
d traffic-table name ftth_voip
5. Enable the ARP proxy function.
Voice media streams for different users of the same SVLAN fail to interchange
because the service ports of the smart VLAN are isolated from each other. Therefore,
the ARP proxy function needs to be enabled on the OLT.
huawei(config)#arp proxy enable
huawei(config)#interface vlanif 300
huawei(config-if-vlanif300)#arp proxy enable
huawei(config-if-vlanif300)#quit
6. Save the data.
huawei(config)#save
Configure the ONT on the Web page.
Log in to the Web page and then configure the ONT on the Web page.
1. Configure the IP address of the PC network adapter to be in the same network segment
with the IP address of the local maintenance Ethernet port on the ONT (default:
192.168.100.1).
2. Open the Web browser, and enter the IP address (https://192.168.100.1:80 or http://
192.168.100.1) (https with high priority is recommended) of the local maintenance
Ethernet port on the ONT. In the login window that is displayed, enter the user name
(default telecomadmin) and password (default admintelecom) of the administrator.
After the password is authenticated, the web configuration window is displayed.
NOTE
The Web page for configuring ONT varies with ONT versions, but the parameter configuration is the
same. For details, see relevant ONT manuals.
1. Configure the voice protocol.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
671