Huawei SmartAX MA5603T Configuration Manual page 79

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Procedure
Step 1 Set up the network environment.
l
l
Step 2 Configure the IP address of the VLAN Layer 3 interface.
1.
2.
3.
NOTE
Step 3 Add a route for the inband management.
l
l
Step 4 Create a user.
Run the terminal user name command to create a user.
huawei(config)#terminal user name
User Name(length<6,15>):huawei
User Password(length<6,15>):test01 //The password is not displayed on the
maintenance terminal.
Confirm Password(length<6,15>):test01 //The password is not displayed on the
maintenance terminal.
User profile name(<=15 chars)[root]:
User's Level:
Permitted Reenter Number(0--4):4
User's Appended Info(<=30 chars):
Adding user succeeds
Repeat this operation? (y/n)[n]:n
Step 5 Create the local RSA key pair.
Run the rsa local-key-pair create command to create the local RSA key pair.
Issue 01 (2014-04-30)
If you log in to the MA5600T/MA5603T/MA5608T in the LAN inband management mode
through SSH, set up a network environment according to
If you log in to the MA5600T/MA5603T/MA5608T in the WAN inband management mode
through SSH, set up a network environment according to
Run the vlan command to create a management VLAN.
huawei(config)#vlan 30 standard
Run the port vlan command to add an upstream port to the VLAN.
huawei(config)#port vlan 30 0/9 0
In the VLANIF mode, run the ip address command to configure the IP address of the
VLAN Layer 3 interface.
huawei(config)#interface vlanif 30
huawei(config-if-vlanif30)#ip address 10.50.1.10 24
huawei(config-if-vlanif30)#quit
If the packet transmitted from the upstream port is untagged, run the native-vlan command to configure
the native VLAN of the upstream port to be the same as the VLAN of the upstream port.
If the network environment is set up as shown in
If the network environment is set up as shown in
command to add a route from the maintenance Ethernet port of the MA5600T/MA5603T/
MA5608T to the maintenance terminal.
huawei(config)#ip route-static 10.10.1.0 24 10.50.1.1
1. Common User 2. Operator:2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
Figure 1-34.
Figure 1-35.
Figure 1-34, you need not add a route.
Figure 1-35, run the ip route-static
54