Huawei SmartAX MA5603T Configuration Manual page 971

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Table 11-23 Vectoring configuration items
Item
Global band plan
Global vectoring
configurations
Issue 01 (2014-04-30)
Function
In the vectoring
algorithm, the
system requires
that the upstream
band and
downstream band
are separate from
each other.
Therefore, the
band plan must be
globally
configured.
Vectoring
configurations
take effect only
when vectoring is
globally enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Description
l The band plan can
be globally
configured only
when vectoring is
globally enabled.
l After vectoring is
globally enabled,
if the band plan
configured for the
line profile is
incompatible with
the band plan
globally
configured for
vectoring and the
upstream band
plan and
downstream band
plan are not
separate from each
other, the port
cannot be
activated.
l Vectoring can be
globally enabled
only when devices
are configured
with VP boards.
l Before enabling
vectoring, globally
configure the band
plan.
NOTE
Services in a
vectoring group
port are interrupted
when the vectoring
function is enabled
or disabled.
Commands
xdsl vectoring
bandplan-type
xdsl vectoring
946