Configuring Link Aggregation, Congestion Control, And Security Policies - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
4.
5.
6.
7.
Step 2 The ONT does not need to be configured.
----End

9.7.1.11 Configuring Link Aggregation, Congestion Control, and Security Policies

The global configuration of link aggregation and queue scheduling based on priorities ensures
service reliability. The global configuration of security policies ensures service security.
Context
Link aggregation provides a higher bandwidth and uplink reliability for optical line terminals
(OLTs) by aggregating multiple uplink Ethernet ports to one link aggregation group (LAG).
Link aggregation is recommended.
Congestion control places the packets to be sent from a port into multiple queues that are marked
with different priorities. Then, the packets are sent based on queue priorities. Congestion control
is recommended.
Security policies ensure system, user, and service security.
NOTE
Enable a service security function based on the service type. For details, see
Plan.
Procedure
l
Issue 01 (2014-04-30)
huawei(config)#ont-srvprofile gpon profile-name ftth
huawei(config-gpon-srvprofile-1)#port vlan eth 2 1100
huawei(config-gpon-srvprofile-1)#commit
huawei(config-gpon-srvprofile-1)#quit
Configure the native VLAN of the ONT port.
If the ONT is connected to the STB through Ethernet port 2, the native VLAN ID is 1100.
huawei(config-if-gpon-0/1)#ont port native-vlan 0 1 eth 2 vlan 1100
huawei(config-if-gpon-0/1)#ont port native-vlan 0 2 eth 2 vlan 1100
huawei(config-if-gpon-0/1)#quit
Create a service VLAN and add an upstream port to it.
Add upstream port 0/19/0 to VLAN 1100.
huawei(config)#vlan 1100 smart
huawei(config)#port vlan 1100 0/19 0
Create service flows.
Set the service VLAN to 1100, GEM port ID to 13, and VLAN translation mode to
transparent transmission, and use traffic profile 8.
huawei(config)#service-port 3 vlan 1100 gpon 0/1/0 ont 1 gemport 13
rx-cttr 8 tx-cttr 8 tag-transform transparent
huawei(config)#service-port 4 vlan 1100 gpon 0/1/0 ont 2 gemport 13
rx-cttr 8 tx-cttr 8 tag-transform transparent
Save the data.
huawei(config)#save
Configure link aggregation.
The following configurations are used as an example to configure link aggregation:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
9.6.6 Principle of Security Data
621