Huawei SmartAX MA5603T Configuration Manual page 931

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Item
Data Plan
The
Table 11-16 Key parameters of vectoring configurations
Item
Global vectoring
configurations
Global band plan
Policy for activating a
legacy customer
premises equipment
(CPE)
Issue 01 (2014-04-30)
Function
Table 11-16 lists key parameters of vectoring configurations.
Data
enable
l Band plan type: 998ade
l USO type: type-a
no-limit
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Description
direction and PSD
automatic shaping
is used in the
upstream
direction.
l force-friendly-ds-
no-limit-us: force
friendly is used in
the downstream
direction and no
restriction is used
in the upstream
direction.
l block: The
Vectoring legacy
CPE cannot be
activated in
common VDSL2
mode. This mode
is used in
Vectoring mature
phase when its
performance is
concerned and
unnecessary
crosstalk must be
prevented.
Description
-
-
The policy for activating a
vectoring legacy CPE is
configured as no-limit at the
initial stage of vectoring
application.
Commands
906