Example: Configuring Tdm Shdsl For Carrying The Pra Service - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Step 2 Save the data.
huawei(config)#save
----End
Result
After the configuration is completed, all the users of the PBX can communicate with Phone B
in the normal state.
Configuration File
board add 0/2 H802EDTB
board confirm 0/2 H802EDTB
esl user
sipprauser add 0/2/0 0 telno 12345600
quit
save
3.3.11 Example: Configuring TDM SHDSL for Carrying the PRA
Service
The MA5600T/MA5603T/MA5608T is connected to the PBX in the TDM SHDSL mode and
then connected upstream to the IP network in the GE mode.
Service Requirements
l
l
The following figure shows an example network of TDM SHDSL for carrying the PRA service.
Figure 3-19 Example network of TDM SHDSL for carrying the PRA service
Data Plan
The following table lists the data plan for configuring TDM SHDSL for carrying the PRA
service.
Issue 01 (2014-04-30)
The PBX is connected to the IP network over a long distance to carry the PRA service.
The user interface data is transparently transmitted on the MA5600T/MA5603T/
MA5608T.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
346