Configuration Example Of The Triple Play Service (Single-Pvc For Multiple Services) - User-Based And Stream-Based Rate Limitation - Huawei SmartAX MA5603T Configuration Manual

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
igmp uplink-port 0/19/0
btv
igmp uplink-port-mode default
multicast-vlan 4
igmp program add name BTV-1 ip 224.1.1.1 sourceip 10.10.10.10
igmp program add name BTV-2 ip 224.1.1.2 sourceip 10.10.10.10
btv
igmp profile profile-name profile0 program-name BTV-1 watch
igmp policy service-port 100 normal
igmp policy service-port 101 normal
igmp user add service-port 100 no-auth
igmp user add service-port 101 auth
igmp user bind-profile service-port 101 profile-name profile0
multicast-vlan 4
igmp multicast-vlan member service-port 100
igmp multicast-vlan member service-port 101
quit
save
3.4.3 Configuration Example of the Triple Play Service (Single-PVC
for Multiple Services) - User-based and Stream-based Rate
Limitation
This topic describes how to configure the triple play service in the single-PVC for multiple
services mode. The user home gateway is connected to multiple terminals to implement the
access of multiple services such as Internet access, VoIP, and IPTV services and perform user-
based and stream-based rate limitation.
Prerequisites
l
l
l
l
Service Requirements
ADSL2+ user 1 and ADSL2+ user 2 are connected to the MA5600T/MA5603T/MA5608T to
implement the triple play.
l
l
l
l
Issue 01 (2014-04-30)
Network devices and lines must be in the normal state.
The system is working properly.
The home gateway has been configured. Specifically, virtual local area networks (VLANs)
have been configured on the home gateway for different services.
The asymmetric digital subscriber line 2 plus (ADSL2+) line template and alarm template
that need to be bound to ports have been configured.
The PC user accesses the Internet properly.
The VoIP user makes calls properly.
The IPTV user watches programs properly.
The maximum bandwidth of each user is 10 Mbit/s, adopting user-based bandwidth
management: The Internet access, VoIP, and IPTV services of each user share the same
total bandwidth and the QoS scheduling is implemented. The service priorities are VoIP
(the value is 6), IPTV (the value is 5), and Internet access (the value is 1) in descending
order. If any two services carry no traffic, the third service can hold a burst of the total user
bandwidth.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
379

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents