Configuring The Vod Service - Huawei SmartAX MA5603T Configuration Manual

Access module
Hide thumbs Also See for SmartAX MA5603T:
Table of Contents

Advertisement

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
----End

9.7.1.10 Configuring the VoD Service

The OLT is connected to the remote bridging ONT through a GPON port to provide users with
the VoD service.
Prerequisites
l
l
l
Issue 01 (2014-04-30)
huawei(config-mvlan1000)#igmp match mode disable
Command has been executed successfully
(Optional) Set the address range for the dynamic programs. If you need to limit the
address range of dynamic programs, perform this operation. For example, set the
address range of dynamic programs to 224.1.1.1-224.1.1.100.
huawei(config-mvlan1000)#igmp match group ip 224.1.1.1 to-ip 224.1.1.100
9.
Set the IGMP mode.
Select the IGMP proxy mode.
huawei(config-mvlan1000)#igmp mode proxy
Are you sure to change IGMP mode? (y/n)[n]:y
Command is being executed. Please wait...
Command has been executed successfully
10. Configure the IGMP upstream port.
Set the IGMP upstream port ID to 0/19/0 and working mode to default. Protocol
packets are transmitted to all the IGMP upstream ports in the multicast VLAN.
huawei(config-mvlan1000)#igmp uplink-port 0/19/0
huawei(config-mvlan1000)#btv
huawei(config-btv)#igmp uplink-port-mode default
Are you sure to change the uplink port mode?(y/n)[n]:y
11. (Optional) Set multicast global parameters.
In this example, the default settings are used for all the multicast global parameters.
12. Configure multicast users.
Add service ports 1 and 2 as multicast users.
huawei(config-btv)#igmp user add service-port 1
huawei(config-btv)#igmp user add service-port 2
huawei(config-btv)#multicast-vlan 1000
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 1
huawei(config-mvlan1000)#igmp multicast-vlan member service-port 2
huawei(config-mvlan1000)#quit
13. Save the data.
huawei(config)#save
The ONT does not need to be configured.
The OLT is connected to the BRAS and the program source.
The VLAN of the LAN switch port connected to the OLT is the same as the upstream
VLAN of the OLT.
The ONT has been added to the OLT. For details, see
OLT.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 FTTH Configuration
9.7.1.3 Adding an ONT to an
619

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartax ma5600tSmartax ma5608t

Table of Contents