Example: Configuring The Xdsl Multicast Service; Configuration Example Of The Multicast Video Service (Static Program Configuration) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
l
l

3.2 Example: Configuring the xDSL Multicast Service

This topic describes how to configure the multicast video service.
3.2.1 Configuration Example of the Multicast Video Service (Static
Program Configuration)
Static program configuration for multicast services is fine-grained program configuration and
management, with functions of program/user multicast bandwidth management, program
preview, and program prejoin. This configuration mode applies to multicast services that have
strict requirements on program and user management.
Service Requirements
l
l
l
l
Figure 3-7
User 1 and user 2 are connected to the MA5600T/MA5603T/MA5608T in VDSL IPoE mode.
Issue 01 (2014-04-30)
Step 2: Dial up on the PC by using the PPPoE dialup software. After the dialup is successful,
the user can access the Internet.
Step 3: When FTP is used to download files and after the dialup is performed on the PPPoE
dialup software, the PPPoE dialup software prompts that the dialup is successful. Then, the
PC can access the Internet in the PPPoE mode.
Step 4: When downloading files through FTP, you can open Task Manager in Windows
and click Networking to check the link speed. Then, you can calculate the Internet access
rate by the following formula: Attainable Internet access rate = Computer network adapter
rate/48 x 53 x 8. The calculated result approximates to the planned 8192 kbit/s.
ISP 1 has two popular music programs, and ISP 2 has one popular music program and one
popular video program. These programs can be ordered continuously and in time.
The program ordering status can be recorded, collected, and reported for monitoring and
charging.
User 1 has purchased only the music program package from ISP 1, while user 2 has
purchased only the video program package from ISP 2. Rights management is required for
the two users.
The package purchased by user 1 limits the maximum available multicast bandwidth to 10
Mbit/s, and the package purchased by user 2 limits the maximum available multicast
bandwidth to 5 Mbit/s. Bandwidth restriction is required for the two users.
shows an example network of the multicast service.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
292